Traveling head PRESS

WITH CONVEYOR AUTOMATION

The Conveyor Traveling Head Press is a more advanced step into fully automating the cutting of a rolled material. The press can pull material off of a roll and feed it through the throat. This press works with substrates of all types and thicknesses because the conveyor advances with the waste material as well as the cut pieces. This press can be used for advanced nesting of patterns using either a parameter-based PLC technology with job-saving technology, or a full CNC software capable of reading .dxf files along with other types of project files.

This press can be used for advanced nesting of patterns using a parameter-based PLC technology with job saving capabilities. Our Traveling Head Presses can accept roll materials up to 72″ wide, but can be custom ordered to accept larger rolls if necessary. The cutting heads are 25.5 x 25.5″ on our stock models, however we have also built custom head sizes up to 40″ x 40″. Tonnages are available between 25 & 50 tons. Higher tonnages can be achieved with some more major custom alterations to the system.  

The machine is equipped with safety light curtains to cover all necessary pinch point areas, and comes with a variety of upgrades including variable degree rotating heads, magnetic platens, and heated platens. The Traveling Head Press comes with four different levels of automation including manual, sheet feed, pinch roller feed, and conveyor feed styles. 

VIDEOS

PRICING & SPECS

25 TON STANDARD

  • Model Number: HH-CTH-25-S
  • Head Size: 25.5"W X 25.5"D
  • Max Material Roll Width: 63"
  • Stroke Adjustment: 0.5" - 6"
  • Daylight: 6"

35 TON STANDARD

  • Model Number: HH-CTH-35-S
  • Head Size: 25.5"W X 25.5"D
  • Max Material Roll Width: 63"
  • Stroke Adjustment: 0.5" - 6"
  • Daylight: 6"

50 TON STANDARD

  • Model Number: HH-CTH-50-S
  • Head Size: 25.5"W X 25.5"D
  • Max Material Roll Width: 63"
  • Stroke Adjustment: 0.5" - 6"
  • Daylight: 6"

25 TON WIDE

  • Model Number: HH-CTH-25-W
  • Head Size: 25.5" x 25.5"
  • Max Material Roll Width: 72"
  • Stroke Adjustment: 0.5" x 6"
  • Daylight: 6"

35 TON WIDE

  • Model Number: HH-CTH-35-W
  • Head Size: 25.5" x 25.5"
  • Max Material Roll Width: 66"72
  • Stroke Adjustment: 0.5" - 6"
  • Daylight: 6"

50 TON WIDE

  • Model Number: HH-CTH-50-W
  • Head Size: 25.5" x 25.5"
  • Max Material Roll Width: 72"
  • Stroke Adjustment: 0.5" - 6"
  • Daylight" 6"

FAQS

  • Rubber & Gaskets
  • Leather
  • Foam
  • Textiles
  • Abrasives
  • Other non-ferrous substrates

The Traveling Head Press is also commonly referred to as a:

  • “Traveling Clicker Press”
  • “Traveling Beam Press”
  • “Side Step Press”
  • “Indexing Head Press”

TECHNICAL INFORMATION

Spare Parts Store coming soon: Call 801.613.7997 to order.

REQUEST A QUOTE!

The American Clicker Press Company has friendly staff waiting to take your call

(801) 613-7997

Available from 9:00 – 18:00 Mountain Time

Address: 587 W 1000 N, Suite 201

Spanish Fork, Utah 84660